Creating an account has many benefits: check out faster, keep more than one address, track orders and more.
The Butt Plate Accessory Kit ships with each System and includes several items required to properly install and use the Butt Plate. Kit contents include: 2 Prep Wipes, 1 Primer Stick, 1 - 3” Locking Strip, 1 – 4” Locking Strip, 2 Key Slot/Mounting screws and an instruction sheet. Total Butt Plate Accessory Kit weight is 1.34 ounces.
The portability of the Weaponholding System allows you to easily move components from site to site. It’s always a good idea to carry a complete Accessory Kit so that you have the proper mounting components for every situation.
| Printable Instruction Sheet (PDF) | Download |
|---|
| Item | AK-BPK |
| Kit Dimensions | 4" x 6" Printed Zip Lock Poly Bag |
| Weight | 38.4 G = 1.34 oz. |
| Contents | 2 - Isopropanol Prep Wipes |
| 1 - Primer Stick | |
| 1 - .75" x 3" Locking Strip | |
| 1 - .75" x 4" Locking Strip | |
| 2 - Poly Bagged - Key Slot/Mounting Screws | |
| 1 - MPWHS Instruction Sheet |
How can I replace my Accessory Kit?
There are two ways. Complete Kits can be purchased, or you can replenish any of the components to keep your kit complete.
Can I reuse the Accessory Kit components?
Most components cannot be reused. The exception is the Key Slot/Mounting Screws. Do Not attempt to reuse Prep Wipes, Primer Sticks or Locking Strips.
Can Locking Strips be substituted if I don’t have the right size?
Locking Strip components have been carefully designed and tested to provide optimum engagement, disengagement and holding strength for each component. Strip sizes and specifications are based on both size and stem count. Using the wrong size or stem count can adversely affect proper engagement, stability, and disengagement of the system and should not be done. In tactical conditions, this can be critical.
You can use the .75”x 3” or the .75” x 4” Locking Strip with the Weaponholder if you do not have a .75” x 2.6” Strip. Caution: DO NOT USE THE .75” x 2.6” LOCKING STRIP WITH THE BUTT PLATE.
Tip: Depending on weather conditions, the adhesive on Locking Strips can take up to 72 hours to reach its maximum cure strength. Whenever possible, preplace strips allowing adequate time for maximum curing. Using the primer sticks can shorten curing times to approximately. 24 hours
| Printable Instruction Sheet (PDF) | https://weaponholder.com/media/manuals/weaponholder/Instuction_Sheet_2015.pdf |
|---|
