Creating an account has many benefits: check out faster, keep more than one address, track orders and more.
The Standard Weaponholder Accessory Kit ships with each Standard System and includes several items required to install and use the Weaponholder. The replacement Accessory Kit is the same Kit that ships with the System. Contents include: 2 Prep Wipes, 1 Primer Stick, 2 - .75” x 2.6” Locking Strips, 2 Key Slot/Mounting Screws, and an instruction sheet. Total Accessory Kit weight is 1.38 ounces.
The size, weight, and portability of the Weaponholder allow it to be mounted almost anywhere. Most regular users have several locations setup to mount the Weaponholder in seconds. Keep in mind there are multiple attachment methods to choose from. Select the one best suited to each location. It’s always a good idea to carry a complete Accessory Kit so that you have the proper mounting components for every situation.
| Printable Instruction Sheet (PDF) | Download |
|---|
| Item | AK-WHS |
| Kit Dimension | 4" x 6" Printed Zip Lock Poly Bag |
| Weight | 39.1 G = 1.38 oz. |
| Contents | 2 - Isopropanol Prep Wipes |
| 1 - Primer Stick | |
| 2 - .75" x 2.6" Locking Strips | |
| 2 – Poly Bagged – Key Slot/Mounting Screws | |
| 1 – Weaponholder System Instruction Sheet | |
| 1 - MPWHS Instruction Sheet |
How can I replace my Accessory Kit?
There are two ways. Complete Kits can be purchased, or you can replenish any of the components to keep your kit complete. Most users prefer to purchase components as needed.
Can I reuse the Accessory Kit components?
Most components cannot be reused. The exceptions are the Key Slot/Mounting Screws and Insert Screws. Do Not attempt to reuse Prep Wipes, Primer Sticks or Locking Strips.
Do Locking Strips wear out?
Yes, Locking Strips have a lifecycle of approximately 1000 engagements before you need to replace them.
Can Locking Strips be substituted if I don’t have the right size?
Locking Strip components have been carefully designed and tested to provide optimum engagement, disengagement and holding strength for each component. Strip sizes and specifications are based on both size and stem count. Using the wrong size or stem count can adversely affect proper engagement, stability, and disengagement of the system and should not be done. In tactical conditions, this can be critical.
You can use the .75”x 3” or the .75” x 4” Locking Strip with the Weaponholder if you do not have a .75” x 2.6” Strip. Caution: DO NOT USE THE .75” x 2.6” LOCKING STRIP WITH THE BUTT PLATE.
Tip: Depending on weather conditions, the adhesive on Locking Strips can take up to 72 hours to reach its maximum cure strength. Whenever possible, preplace strips allowing adequate time for maximum curing. Using the primer sticks can shorten curing times to approximately. 24 hours
| Printable Instruction Sheet (PDF) | https://weaponholder.com/media/manuals/weaponholder/Instuction_Sheet_2015.pdf |
|---|
